www.blogbangboom.com - BlogBangBoom.com
Posted 09/06/2023 by

How to Get Tree Sap Off Car Paint Properly

How to Get Tree Sap Off Car Paint Properly

Parking under trees may provide nice shade, but it opens your car up to drippings of sticky tree sap. The natural adhesive clings to paint and can be tricky to remove without causing damage. With some care and the proper car paint protection technique, you can successfully get tree sap off your car’s exterior.

How Tree Sap Harms Automotive Paint

Tree sap consists of sugars, resins, and organic compounds that provide nutrients for the tree. As it leaks or gets secreted from bark, it oxidizes and dries into a sticky, gluey substance when making contact with air.

This sap adheres readily to car paint as it drips from branches. If left for an extended time, the sap oxidizes further and essentially bakes onto the clearcoat finish. Attempting removal when hardened can instill light scratches or swirls in the paint if not done properly.

The key is addressing fresh sap as soon as possible before it permanently bonds to the painted exterior. This prevents etching and preserves the clearcoat's smooth surface.

Safely Dissolving Sap with Chemicals First

Trying to physically scrape off or rub away hardened tree sap risks marring the paint. A better approach is using chemical cleaners to soften and dissolve the sap first.

Look for tar and sap remover sprays made for automotive use. These break down the sap's natural adhesives chemically, allowing you to wipe it away without friction or damage to the clear coat.

Apply the remover liberally over the sap and let it soak for 2-3 minutes. Reapply more product as needed to keep the area wet so it penetrates the sap fully.

Gentle Wiping Motion to Remove

Once adequately softened, use a clean microfiber cloth to gently wipe away the dissolved sap. Fold and refold the towel frequently to expose clean areas for wiping.

Try to keep wiping motions straight rather than swirling to avoid instilling light scratches. Rinse the area with water periodically to check your progress. Remember to reapply cleaner if sap remains.

Rinse Paint Thoroughly

When all visible sap has been removed, rinse the full area with water to dilute any remaining cleaner residue. Then wash with your regular car soap and rinse again. Inspect closely to ensure no leftover sap or cleaner remains.

These chemicals can be harsh, so you only want them to come into contact with the paint briefly. Thorough rinsing restores the clearcoat's pH balance afterward.

Reapply Car Paint Protection

As a final step after sap removal, put back a layer of car paint protection like wax or a ceramic coating. Even slight sap etching opens up microscopic pores in the clearcoat. The wax or ceramic fills these in, providing a smooth barrier against new environmental contaminants.

Prevention with Parking Considerations

To minimize dealing with tree sap, try parking in driveways or garages whenever possible. If street parking under trees is unavoidable, use a sap-resistant car cover. Also, examine closely for fresh sap during weekly washes to treat it quickly before drying out.

With prompt attention and the right chemical removal process, you can conquer sticky tree sap drippings without sacrificing your car’s flawless painted exterior. Be sure to follow up with car paint protection applications for continued protection afterward.

Posted By

Contact Member View Listing
Our Family of FREE Listing Sites: